top of page

GAS FLAME SYSTEM

Power Flame II

Power Flame System II can shoot LPG flame up to 10 meter high.
The LPG gas tank(30L) is housed inside the system and LP gas from the external gas cylinder flows into the system inside-installed gas tank. After one shot, the system needs about 25 seconds to charge LPG to the inside-installed gas tank from the external gas cylinder. So, you have to consider the shooting interval .


For safety, this system has safeguard system which is composed of flame sensing rod and its flame sensing board. Without the solid pilot flame, the solenoid valve does not open and accordingly, it cannot shoot the flame. The pilot flame strike process repeats till the pilot flame becomes solid and even during the show, when the pilot flame is gone unexpectedly, the pilot re-strike resumes automatically and immediately within 0.3seconds. During this re-strike process, the solenoid valve keeps closed so that no danger to shoot the flame accidentally.


This system is controlled with standard DMX 512 controller or our handy DMX controller.

Model : PF-600

Voltage : 110-240VAC 36W

No. of flame jet : 1

Ignition : Pilot Flame

Main Fuel : LPG or Propane

Fuel Tank Capacity : 30L

Pressure media :  Natural pressure of LPG or Propane

Flame height : 8 - 10m

Shooting Interval between the shots: 25 seconds

Working Pressure : 3 - 5 bar

Control : DMX 512

Weight : 38KG

Dimension : 42cm(L) x 63cm(W) x 74cm(H)

Accessories : 10m DMX cable, LPG Hose, No road case

bottom of page